3/25/2016

We are almost done. We accomplished putting so much things, now we just need to put the two body pieces on one another. Then add the finishing touch. Hopefully we finish tomorrow so that we can test it out. We know for sure that it will work thanks to our mechanic  

This is a picture of our robot from last week, Much progress has been made.

This was probably day two.

We not only put on the motors, we attached the battery (by way they were not fully charge) and the wheels to make the robots move. It was difficult on deciding what bolts to add on the robot 

3/30/2016

Today in class we finished the base form of our robot. The robot is now able to move using the PS2 controller. The battery is currently low so we have it attached to the charger for it. The battery lasted long enough for use to test out the controls and tap out classmate's foot. We are quite exited for when the battery charges fully and we can race the robot around the classroom with the other groups.

                                        

3/24/2016

Today we are attaching the Silva wheel and the controller on the robot. Last week, before we wrapped up, we had managed to put the chain for the wheel to have the advantage to move. After that, we screwed everything together. Then once everything is situated, We put on the switch and the thing that talks to the remote.

3/22/2016 

We have started our robot by taking everything apart then we began to work on it with the amount of time we had left. Taking the pieces apart was pretty easy, but putting them back together was a bit difficult. We manage to put the motors on the unfinished bot.